Whether its high buildings or ground, Hi-Fliers can erect your flagpoles! At Hi-Fliers we do not subcontract this installation work. Our erection crews are highly qualified and the best in their trade to ensure that our flagpoles stay in position. They are Hi-Fliers! And are careful, conscientious and experienced, ensuring that the work is carried out safely and squarely. From our wall mountings to our hinged base plates, all are galvanised and thoroughly tested and only the best fixing systems are used, varying from prefabricated concrete blocks, expansion bolts to chemical anchors. Hinged Base Plate Flagpoles The heavy duty hinged ground attachmens is a hot dipped galvanised steel base which allows for precise adjustment and ease of erections, and lowering of the flagpole. Hi-Fliers have developed a method of installation that allows for virtually immediate erection of the flagpole. This saves time in waiting for the concrete to set and eradicates hinge movement. The labour saving device is a precast concrete block with intact hinge mechanism, these are manufactured to specific dimensions and can be used for flagpoles up to 12m. The concrete can be re-used if required. Wall Mounted Brackets Wall mounted brackets come in either cantilever for vertical or 45 degree positioning and standard for vertical 20-45 degree positioning with adjustable arms. Both these brackets support flagpoles from 2-6m. Flagpoles from the cantilever bracket come with a tube embodied into flagpole during production, which is slotted into the wall bracket and secured by means of a bolt. Wall brackets with Hinged Base Plates These wall brackets incorporate a hinged base-plate system supported on a steel platform fixed at a height about 150cm from the pole base. These wall brackets are for flagpoles ranging from 6-10m.